Samsung Galaxy Tab A11 Wall Mount / Tablet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom 3D-printed wall mount for the Samsung Galaxy Tab A11, ideal for Home Automation dashboards.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 550
- Wydruki
- 4
- Wyświetlenia
- 3588
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These parts are a custom-designed wall mount for the Samsung Galaxy Tab A11. I created this model because I couldn’t find a properly fitting holder for this specific tablet model. The mount is designed for use as a smart home control panel, for example, with Fully Kiosk Browser PLUS and Home Assistant, but you can also use the holder for any setup where you want the tablet mounted cleanly and securely on a wall. Suitable for both portrait and landscape orientation (depending on your dashboard layout).
The holder consists of three parts: the mounting plate, the front cover, and a spacer piece.
You need to insert M3 heat-set inserts (4 pieces) into the mounting plate, which allows you to screw the front cover in place securely. I use M3 hex socket screws for this.
The mounting plate can be attached to the wall using four countersunk screws.
If you cannot drill the cable hole in the wall precisely aligned with the tablet’s charging port, you can use the space piece (Extender). In the pictures, you see another space piece because of the weird shape of my staircase.
In my setup, I use this mount with Fully Kiosk Browser PLUS (paid version), which automatically turns the screen on when motion is detected using the tablet camera. I connected the charger via an IKEA TRÅDFRI smart plug, controlled by Home Assistant, to keep the battery between 40% and 80% for optimal lifespan.