1 / 4
100x100 Test Cube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cube can give is 100mm x 100mm. It can give accurate dimensions to see if you printer is off in any direction.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 214
- Wydruki
- 1
- Wyświetlenia
- 1626
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 100x100x100mm cube. This allows great accuracy when printing future models. This allows you to see if you printer is not quite meeting the exact points needed when printing. If these points aren't met models can be too big or too small. This print should be done every few months to make sure that your printer is in good working condition. I recommend 10% infill with lightning infill pattern as well as a .2 mm layer lines for best results.