Enclosure for Uctronics U2663 DC buck converter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure for a Uctronics DC buck converter module that produces 5.2v 5a output.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two part box enclosure for a Uctronics U2663 DC buck converter board. The board is configured for 5.2v output at up to 5 amps (current max is input voltage dependant). It has openings for terminal block input and USB output. It does not accomodate the barrel plug input or terminal block output. Ventilation slots are present on 4 sides. I acquired the board for powering a Raspberry Pi 4 B from a 12v source.
I have printed it both in filament and resin. Both work. Friction fit on the filament print is sufficient to keep the lid in place, a bit of CA glue was used to secure the lid on the resin print. Input wires should be secured in the terminal block before fitting the lid.
This was my source for the board:
https://www.amazon.com/UCTRONICS-Converter-Transformer-Voltage-Regulator/dp/B07XXWQ49N