Lion Cranium and Mandible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed models of lion cranium and mandible (Panthera leo) from the Mammal Research Institute, Poland
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 456
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a life size model of a lion (Panthera leo) cranium and mandible, originally made available by the Mammal Research Institute, Polish Academy of Sciences under CC-BY license. I found the model on Sketchfab, but downloaded the original models from the Open Forest website.
I cleaned up the models to make them 3D printable by closing holes, removing floating pieces and decimating to reduce the file size.
Printing:
0.20 mm layers,
3 walls,
8% grid infill,
tree supports at 30
top interface spacing = 0
top interface layers = 2
top z distance = 0.2
I printed mine with Sunlu matte bone white PLA on the Bambu A1. The occipital looks a little rough, but this area is also damaged on the original scan so it's already rough. I decided to position the mandible on its inferior surface so the teeth could print very pointy. Cranium takes about 16.5 hours, mandible is 5 hours. You could reduce the walls to 2 to reduce the print time--I wanted the weight. It's big but totally worth it. :)
Bambu 3mf on Makerworld.