Tokyo Marui AUG A1 Military picatinny rail foregrip replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace the original foregrip with a universal picatinny rail system.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a standard picatinny attachment rail system for Steyr AUG A1 -based airsoft rifles, specifically fitted for Tokyo Marui Military model but should work on other AUG variants as well.
Designed to allow the barrel to be detached without having to remove the whole rail assembly!
Featuring a bottom rail for grips and bipods and side rails for other attachments on both sides for ambidextrous use.
Designed to replace the original foregrip, this rail attaches to the original bolt location so you will need an M4x20 bolt and an M4 nut. Additionally you will need 1-2 small-ish zipties to attach it to the barrel. This is an optional but recommended step.
For printing you will need to use supports and I do recommend using brim as the easiest print orientation is upright.
For licensing the model I do not allow commercial usage, however if you own such a store you are welcome to print and hand these out for free to fellow vintage AUG owners.