1 / 5
AEG VX7 Replacement Wheels with TPU rim (622 bearing) — zdjęcie 1
1 / 5

AEG VX7 Replacement Wheels with TPU rim (622 bearing)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement Wheels for the AEG VX7-2-IW-S floor vacuum nozzle to snap on the original bearings (622 / Skateboard)

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
1
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I was sick of the wheels coming off of the floor brush so I designed some new ones which fit tighter. To make them run smoothly, I designed a snug TPU rim for the wheel. The original wheels were declared as ABS / TPU so it is not too far off, to replace them with printed parts.

The vacuum uses some 622 bearings where the wheels are snapped on. This is specific for the AEG VX7-2-IW-S but may also fit other vacuums or applications with 622 / Skateboard bearings.

I printed them in PC-ABS and TPU 95A and there was quite a lot of force required to push them on, but they sit really snug on the bearing.

Printing:

The 3mf file contains both models, split them and print them separately. The rim and the tire should be printed laying flat. Bed adhesion with the TPU rim may be tricky, I used a clean powder coated PEI sheet which lead to great adhesion. Due to the small contact area, the tire came off pretty easily.

For the rim, I would recommend a filament with good layer adhesion (PETG, PC, PC-Blend) because the hooks may snap with PLA or other brittle filament.

I printed in 0.2 layer height with a .4 nozzle.

Make sure to dry your TPU or it will result in a stringy mess, like mine.

Assembly:

The rim is designed with zero tolerance to sit tight on the rim. To get it over the second ridge, I used a nylon prying tool for phones to lift the edge and push it over.

When the wheel is assembled, just push it over the existing bearing and enjoy your new silent wheels, that hopefully won't come off on their own.

Tagi