SOVOL SH01 dryer - square hydrometer bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SOVOL SH01 dryer bracket for square type hydrometer
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 1
- Wyświetlenia
- 258
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi,
I designed a bracket to hold my square 45x45mm hydrometer in my SOVOL SH01 filament dryer.Simple and effective. No additional hardware needed. No support needed.
13/01/2026: made V2 and V3 because I found that the hydrometer could touch the spools.
V2 is just slightly higher, but still flat and easy to print. But still touches big spools, like my Elegoo carboard ones.
V3 is fully remixed. The hydrometer has been angled to be much higher. This can be printed at an angle of 34.1° as shown in the picture, will a manualy added normal support for the long bridge. I used adaptative layer height aswell.