DS1054/DS1000 series to 2020 extrusion adapter/to vesa mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
adapter for oscilloscope into 2020 extrusion and or vesa mount. basically a very tight feet grabber
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DS1054z to 2020/vesa adapter
Basically that, its very tight, you may need to reduce the "back tooth" a tad, you may not (it fit for me but very tight)
I had originally made the little back tooth to allow for more rigid mounting by ramming screws into there, however after softly hammering it onto the feet of my oscilloscope, it was so tight and solid i saw no reason to do that anymore.
DO NOT print this in PLA (creeps over time) PETG may work, however an engineering material is more recommended. i used ABS-CF.
You need:
4x | M5 SHCS x 80mm
1(3)x | 2020 Extrusion(s)
4x | M5 2020 T nut
Optional:
5x | M3 voron inserts
5x | M3 screws (any)
Oh yeah, print once as is, and once mirrored, or otherwise it "could" slide out
All the weight is basically transferred through the screw into the extrusion, everything is compressive force where possible and with the way its printed theres no real possibility of delamination. i have shook this thing around over my bed like a madman to test if it holds... oh yes... it holds!