Prusacaster 2077 Custom Inlays for Cyberpunk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple remix of Cyberpunk 2077 and Johnny Silverhand inlayed into the guards.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Filament Used:
Polymaker PETG (Old Formula) Lime, Cyan and Magenta
Polymaker PETG (New Formula) Yellow
Standard .2mm Profile works fine!
Note: The file with all three guards has an error with the top guard but still prints good. The issue was I could not get the “Cyberpunk” logo to sit flush AND accept color without it being painted over. I was finally able to fix the top guard with the Cyberpunk Inlay. It is uploaded as a separate file so you have the choice of either style.
These files were done in BambuSlicer, It should work find in PrusaSlicer but if there are issues please let me know and I will create a separate set of files.