XL Hat Knitting Loom Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A knitting loom for knitting extra large sized hats.
- Ocena
- 3 / 5
- Polubienia
- 17
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of a winter hat knitting loom. I found the original design works well for child size heads, so I made this remix for adult size heads.
This is a rather large model, so you'll need a printer that has at least a 250x250mm build plate.
I also uploaded a model that has been split into 3 parts for smaller printers. It will need to be glued together.
You'll need to print a loom and 54 pegs. The parts should open in the orientation of how they're supposed to print.
Then, assemble as pictured. The pegs fit very tight and shouldn't need any glue. A slip joint pliers work very well to push the pegs into place.
This is a video on how to use it.