Print-Ready Iguana STL + Interchangeable Heads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A detailed 21 cm iguana body plus 3 interchangeable heads, all in clean, print-ready files.
- Ocena
- 0 / 5
- Polubienia
- 16
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Articulated Iguana with 3 different head variations
I’m excited to share the Iguana STL, featuring a detailed body and three unique head versions for you to swap and experiment with.
✨ What you’ll get:
🦎 Full iguana body (base length: 21 cm without head)
👀 3 unique interchangeable heads
🖨 Clean, print-ready files
For those who enjoy smaller prints, I also tested a scaled-down version at 8 cm (keychain size). It printed fine with no issues, but note that the articulated joints get quite thin at that scale.
🖨 Recommended Print Settings
Walls: 2
Infill: 15%
Supports: None needed
For the open mouth head version: add a 5mm brim on the upper jaw (since it has a slimmer surface touching the bed).
This one was a lot of fun to put together, and I’m excited to see how you’ll bring it to life with your own prints and painting styles.
Thanks again for your support — you make these drops possible, and I can’t wait to share more soon! 💚