Free Paws Pet Dryer Handle Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for a pet grooming dryer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
I purchased a pet grooming dryer (Free Paws Pet Grooming Hair Dryer - ML-PD01-Y) for $100 on Amazon about 8 years ago. The switches died so I replaced those with some off-the-shelf toggles, and at that point I knew I would have to use it until the wheels fell off. Well, the handle broke. Rather than try to make an existing handle work and waste time fiddling with that, I just broke out the calipers and started making notes. This is the result. I have attached a 3MF file for fuzzy skin if you want it just on the outside of the handle as shown in my photos. I have included a photo of my first print of the model attached to the dryer.
The dryer I have is no longer listed on Amazon or anywhere else, unfortunately. This is the closest thing dryer I could find (FP-PD02). They are both sold as the "Free Paws Pet Grooming Dryer", and the chassis doesn't appear to be that different.
https://brandline.us/products/free-paws-pet-grooming-dryer-yellow
For reference, the distance of the screw holes for these handles is 64mm when measured from the center of each hole. If you have the FP-PD02 dryer, just check that before printing. I reused the bolts and nuts from the original unit, but they are M4x8 if you want to replace yours.