INBXX - magnetic t-nut placement jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bar with magnets spaced out to hold loose t-nuts in place for self-sourced INBXX builds
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
While waiting for kits/parts to ship for INBXX I made this jig using magnets I had on hand. The idea is that if you are self-sourcing and using loose t-nuts, possibly t-nut sliders the magnets are spaced to match the holes in the faces. I had 10x3 round on hand and needed to stack 3 to get enough hold to where i think it will be useful. The bars are dovetail split so they fit on a core one bed. I did test prints on an old ender so I left the tolerances a bit loose, super glue should hold well enough to keep them together.
This is also my first time using a proper cad program and I have not messed around long enough to figure out how to flip the orientation. Flip the model over and print it solid side down to avoid supports.
qty 30 - 10x3 round magnets to fill both bars
If you cut the thick side a couple times in line with the middle of the magnets you can snap the bar open fairly easy and retrieve the magnets.