OV9726 Axiscope 2020 Mount and Bed Plate Stops
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For XY axis alignment using the great Axiscope usermod, I've remixed the base model to allow screw mounting to 2020.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This design is mounted directly to 2020 extrusion.. it sits lower than the print bed and there is no risk of collision betwen lens and toolhead.
For your voron design, cut a length of 2020 extrusion the same length as your bed cross brace. Align this with edge of your bed plate. Then you can permanently mount the Axiscope camera to your printer.
I use this to set up the Axiscope camera, and also allow me to have print plate stops bolted to something solid. this makes plate setup super easy.
The plate stops are meant to either mount to the end of 2020 extrusion or flip it around to screw it directly to 2020.