fanttik v8 apex vacuum storage dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
dock for the v8 apex vacuum for use with accessory box or able to be wall mounted vac. locks in place with flex tab
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
this model will store the v8 apex fanttik vacuum without blocking the intake or exhaust ports allowing use while in the dock. model has magnet pockets for 5mm x 10mm magnets in both the top part and the accessory box. The wall mount version also has magnet pockets; However they are unnecessary if you plan on only using it in wall mount mode. there are also two variations of the accessory box, thin walls work well enough if its just going to sit on a shelf but the thicker walled version would probably be a better choice if you plan on bouncing it around in your car. lid is for accessory box when vac portion is wall mounted.
I've printed this on a prusa xl in one piece, I'd be interested to see results of someone printing this in two pieces.
310mm x 152mm