Gaming chair (respawn 900) tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got a few gaming chairs (https://a.co/d/02yN823s) to replace an old couch but missedhaving a spot for phone and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I got a few gaming chairs (https://a.co/d/02yN823s) to replace an old couch but missed having a spot for phone and snacks. After a few interactions I came up with this. It uses the cupholder, which can be removed easily, as way to pin and hold the tray in place.
This should work for other chairs as long as you can remove the cupholder and use it to pin the piece the same way, just adjust the size.
Keep in mind that this model will be 300mm (tray_width + tray_depth, because tray_width^2 is used for the cupholder area) by 120mm by default. So you'll need a printer that can do that much. Otherwise jump to the customizer link below and reduce the tray size.
Remember that if you print in PLA you won't be able to have anything too hot on top of it. Like the hot chamomile tea for that certain boss on Elden Ring.
Also excuse my openscad skills, still learning it.
The parametric version: https://www.thingiverse.com/thing:6690404
Category: Other