Zurg shoulder articulation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for Toy Story 4 Zurg action figure's (the one that can reply to Buzz over IR) shoulder…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a replacement for Toy Story 4 Zurg action figure's (the one that can reply to Buzz over IR) shoulder articulation part. I broke mine^H^H^H^Hmy son's by just moving the arm, so it's likely the other shoulder part will also eventually fail.
Last picture in the gallery is to help open the toy.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.12
Infill:
I recommend 100% here to make sure it's sturdy
Notes:
Note 1: this is my first part I created from scratch and I wasn't able to use a more round
disc (the exterior like a torus) because I'm not very good at blender. But it works without being too ugly. Feel free to remix it if it bothers you. I've included a picture of it reassembled.
Note 2: I recommend printing this on PLA+ or stronger
Note 3: I recommend using the split version so you can print without support. I used superglue and a small clamp to let it dry. I've tried multiple ways to print this with supports and they all ended up with some annoying failure like rough in disc making it hard to rotate or discs too fragile. I've used a modified Ender 3 Pro, so maybe you have better luck printing with supports in a better (or better tuned) printer.
Note 4: You might want to find a filament with the right color. I painted over white PLA+ and it comes out easily due the little attrict with the side parts.
Category: Replacement Parts