1 / 6
Risers for Pinnacle 50mm Zinc Plated Barrel Bolts — zdjęcie 1
1 / 6

Risers for Pinnacle 50mm Zinc Plated Barrel Bolts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Risers suitable for the $3 Pinnacle 50mm Zinc Plated Barrel Bolts found at Bunnings. I/N: 0080685

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
27
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Risers suitable for the $3 Pinnacle 50mm Zinc Plated Barrel Bolts found at Bunnings Australia. These risers allow you to adapt the bolt lock to your needs. I know this is a really simple model but the holes are weirdly spaced and this took me way longer than expected to get the dimensions correct. Hopefully they'll line up with other locks of the same type because these things seem all over the place. If you're using any riser over 10mm I'd recommend getting some longer screws as the ones included probably won't be long enough to work well - the standard screws are about 20mm long.

Printed with Esun PLA+ at 0.24mm layers with 15% adaptive cubic infill, but I'm sure other infill percentages and types will work just fine.

Tagi