be quiet PURE BASE 600 dust filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dust filter for the be quiet PURE BASE 600 PC Case
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 1652
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
I did cut a large rectangular hole into my be quiet! PURE BASE 600 case and needed a dust filter for it now.
I wanted it to be magnetic and removable, so I made that frame for thin filter materials.
The frame is 410mm tall and 140mm wide. It became accidentally 20mm taller, but still fits nice into the front.
The frame is made out of 2 parts needed to be printed twice each to make a sandwich.
The holes are made for 6*3mm magnets.
I glued one side of the frame together, then glued in all magnets(watchout for the magnet beeing inserted to the opposite pole of the opposite magnet, so they stick together!!! i did not on the first try).
Then just lay your filter mesh between the frame sandwich and snap it with the magnets together.