TX16s buddy box (wireless master/trainer)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a wireless buddy box for Radiomaster TX16s
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a wireless buddy box for my Radiomaster TX16s
This buddy box would allow to wireless link two TX16s in Master/Trainer mode.
Radiomaster is already selling this kind of module.
However their modules need to be linked (soldered with) mini SBUS receiver to work. They won't work with old PPM radios,. Furthermore they are "one way" modules (trainer to slave) and finally quite expensive...
So decided to build mine with the following specifications:
cheap (two fully working modules for less than 20$)
auto configuration as master or slave or vice versa
auto binding between two modules
fully hidden into the "external module" compartment (no dangling wire outside the radio, no cover modification ))
no modification into the TX16s
no firmware modification of your TX16s (stock EdgeTx firmware)
high speed wireless communication with about 20m range
automatic On/Off of the buddy boxes via EdgeTx
compatible 16 channels SBUS and PPM signals
extensible to further options (teasing: more to come !)
The full project is open source / open hardware. Details are available on my hackadays pages : https://hackaday.io/project/204529-tx16s-buddy-box-wireless-mastertrainer
Note as well that there is nothing to print in this project ! I have added a fake "plug cover" to be able to use Printables as usual !