1 / 4
Livolo light switch wall-panel gap filler simplified version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simplified version of AdrianDobre's original model, no disconnecting of the light switch needed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simplified version of AdrianDobre's original model, no disconnecting of the light switch needed.
I noticed that disassembling the Livolo light switch to install the original model was a bit too much work for me. So I cut out the necessary part of the model, just the filler. You can easily bend this around the switch's wall panel. Also easy to remove again. See GIF
0.20mm
2 walls
15% infill