Omnium Cargo Headtube Armor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This snaps onto your headtube to protect the paint on an Omnium Cargo.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Want to protect your headtube from cargo and cable rub in a more robust way than just helicopter tape? This 3mm thick armor will do just that! Printed and tested on my Omnium Cargo V3. The snap fit prevents twisting via pressure fit and contacting the welds on the top tube
Make sure to clean the headtube before installing.
By default the length is 250mm, the blank version can be adjusted via scaling only the Z axis. I used gyroid infill at 20% with 2 walls and that provided enough flex. Print with a brim, 5mm inner and outer worked for me.
Fusion 360 file included for anyone looking to modify for different bikes. Design is parametric. Just need to measure your headtube diameter and length.