1 / 3
Snapmaker U1 to Dryer PTFE Tube Washer Set (M6 Coupler)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of 8 PTFE tube washers to mount an M6 coupler from Snapmaker U1 feeder to Snapmaker X / Polymaker dryers.
- Ocena
- 4,625 / 5
- Polubienia
- 86
- Pobrania
- 451
- Wydruki
- 8
- Wyświetlenia
- 2837
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 8) (Komentarze: 16)Remiksy (0)Kolekcje (207)Powiązane
This is a complete set of washers for PTFE tubes for the Snapmaker dryer and U1 printer. There are 8 washers, 4 of which are threaded, allowing you to use the original filament feeder housing from the Snapmaker U1 printer and attach a PTFE tube coupler with an M6 thread to connect to Snapmaker X Polymaker dryers. It may also work with other dryers.
