XREAL Air 2/Air 2 Pro Prescription Frame Adapter for XREAL One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adaptor I made in Tinkercad to adapt my prescription Air 2 Pro frames to my XREAL one.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upgraded from a pair of XREAL Air 2 Pros to the XREAL One, but already had a prescription lens made from HONSVR, and didn't want to buy another or wait a few weeks. Found some from a site called InfinityOne, but their shipping times and prices for a set of 3d printed adaptors was a bit much as well.
So I measured, tinkered and after about 6 revision, came up with this model. It's not the prettiest, but it works well, fits well and allows the glasses to still be foldable.
The only drawback is that this adaptor will block the port for the XREAL Eye, so keep that in mind.
I printed this on a Creality CR6SE at 100% infill. Supports and adhesion settings optional, but I used a brim and tree supports.
If you like this, consider buying me a coffee! Thanks!
