Oil Filter Funnel for Lawn Mower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of custom funnels for changing the oil and oil filter on a ridding lawn mower. I was sick of having the…
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 191
- Wydruki
- 3
- Wyświetlenia
- 1536
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
This is a set of custom funnels for changing the oil and oil filter on a ridding lawn mower.
I was sick of having the oil drain down the frame under the oil filter, so I modeled these.
One is for the oil filter, (Mine is a FRAM PH8170) the other is for the oil drain spout.
I took the measurements off of my engine: (Craftsman) Briggs & Stratton Intek Plus 20HP. (540cc) - The engine is mounted inside of a John Deere 102 5-speed. (The engine in the Deere was swapped with this engine as the previous owner blew it up.)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.6
Infill:
20
Filament: Hatchbox PLA BLACK
Notes:
Printed at .32 layer height with a .6 nozzle. A .4mm nozzle will work fine.
Category: Automotive