ThunderBolt-2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ThunderBolt-2 is a fast, easy-to-assemble 3D-printed rocket designed for hobbyists and makers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Standard Digital File License
ThunderBolt-2 is a fast, easy-to-assemble 3D-printed rocket designed for hobbyists and makers. It prints in two parts ONLY for quick assembly. Compatible with Estes A8, B4, B6, C5, and C6 engines, it reaches altitudes up to 987 feet with the C6 engine, which is incredible for the engine's low power.
Watch how to make the engine mount and how to connect the parachute on this video:
https://www.youtube.com/shorts/4KyU6-_muKE
How to Lauch video:
https://www.youtube.com/watch?v=2ui_Robh7rs
(This video is outsourced)
If we reach 100 followers on Cults3D or 100 subs on YouTube, I promise I will make a 1/4 scale accurate model of the legendary Aim-9x. If we surpass this goal by a lot, I will make something more special with the Aim-9.
Stayed tuned in.
3D printing settings
Material: ABS
Infill: I would recommend 50% but less, the higher it goes.
Compatible rocket engines: A8, B4, B6, C5, C6
Other needed supplies:
-Estes Regular Engine Mount
-Estes Parachute
-Shock Cord
-Super Glue
-Wadding
-Estes Lauch Pad