Supermicro CSE-847E16 Fan Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement fan rail/capture for the hot swappable chassis fans in the CSE-847E16-RJBOD1
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Several of the fan capture rails were broken in my Supermicro CSE-847E16-RJBOD1 (45-disk JBOD). I modeled this replacement in Fusion 360 and confirmed it works well in the chassis. I printed on my Prusa CoreOne in both Overture PETG and Overture ASA and both work well. I've included the F3D and STEP file for further customization. I made the screw hole oval to allow some play due to different shrink rates of different plastic. Support from build-plate works but I also added supports to the cable head capture. No need to support the screw hole. The 3mf file if opened as a project has the correct orientation and supports in place.
I couldn't get these directly from Supermicro and the one reasonably priced eBay item was incorrect but the cable heads were reusable so I'll consider that a win for $20. The links to the filament are Amazon associate links which I'll received a commission for if you use them and it won't cost you anything. If you'd rather not, just search for the filament from your favorite filament supplier.