CZ Mecgar Compact Baseplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement baseplate for CZ 75 Compact pistol magazines. Printed in PLA with 25% infill for some added strength.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I noticed the original CZ 75 Mecgar Compact baseplates were a bit flexible when the mag was fully loaded, and for some reason it irked me enough that I had to design my own in FreeCad. These are thicker on the bottom so they don't flex as easily, and although I haven't had one fail yet they have survived multiple 5 foot falls fully loaded and show no signs of wear, I did try printing some in ASA but the layer adhesion proved too weak to stand up to the same test. Printing with supports is absolutely mandatory, if you don't the layers get really wonky.