1 / 6
Sovol SV08 toolhead cover EDDY PROBE + 3010 fan for TH MCU — zdjęcie 1
1 / 6

Sovol SV08 toolhead cover EDDY PROBE + 3010 fan for TH MCU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Toolhead cover compatible with BTT EDDY DUO

Ocena
5 / 5
Polubienia
23
Pobrania
97
Wydruki
4
Wyświetlenia
709
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

The toolhead cover works with BTT EDDY DUO and has a better clearence for the cable so you won t compromise it as i did because now the cable is not touching anything.  I also added some holes on top of the cover for better toolhead mcu cooling. It is also compatible with Neopixel led for nozzle, it s basicly the same hardware as original model from Nadir.

BOM:

  • 4x3 magnets (you can use the ones from the original cover)

  • original 5020 part cooling fan

  • additional 3010 fan 24V for toolhead mcu cooling  ( i recommend GDSTIME fans )

  • neopixel pcb led

  • 2 m3x8 screws for the fan bracket

  • 2 m3x4x4.5 heat inserts

For printing it i recommend ABS/ASA with high HDT, normal voron parts printing settings and some tree supports

Tagi