Hidden Fastener Coathook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple coat-hook with no visible fasteners
- Ocena
- 4,875 / 5
- Polubienia
- 128
- Pobrania
- 529
- Wydruki
- 18
- Wyświetlenia
- 1762
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This two part coat-hook is perfect if you don't want any visible fasteners on your walls. Use your choice of screws to attach the mount to your wall with the chamfered edges upwards, then slide the hook onto the mount.
The mount comes in two styles, one with recessed areas for screws with flat heads, and one with chamfered edges for ones with angled heads.
Print both parts in their original orientation at any layer height. Use at least three perimeters, or more if you need a sturdier part. The hook will need supports for the upper portion of the recessed area in the back. Depending on the tolerances of your printer, you can adjust the size of the mount for a more snug fit, but it should be fine if printed as is.