Prusa CoreOne+, CoreOneL 2kg spool holder and TPU O-ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2kg spool holder for Prusa CoreOne+/CoreOne L with support for wider spools using base mechanism+ printable TPU O-ring.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 395
- Wydruki
- 8
- Wyświetlenia
- 1199
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is an extended version of the original Prusa CoreOne+/CoreOne L spool holder.
The stock holder fits only standard 1 kg spools, so I redesigned it to support wider filament spools used by many manufacturers.
The model also includes a printable TPU O-ring that replaces the original rubber ring, so you don’t need to buy any additional hardware.
Printing notes
Holder
Material (holder): PETG
Layer height: 0.2 mm
Infill: 20% grid
Supports: Not needed
Orientation: Print the holder flat as shown in the preview
O-ring
Material (O-ring): TPU 95A or softer
Layer height: 0.15 mm
Infill: 10% grid
Perimeters, first and last layer: 1-2
Supports: Not needed
Orientation: Print the holder flat as shown in the preview
Assembly
Just swap the original part for this extended version and slide the TPU O-ring into the groove.
If you like my work please support me. :-) Buy me coffee at ko-fi.
Remix info
Based on the original CoreOne spool holder by Prusa Research.