Amazon V6 Revo Hotend for EVA 3 and E34M1 toolhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Amazon budget V6 hotend for EVA 3, slightly different specs than standard v6 hotend
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a budget Revo V6 hotend from Amazon and it didn't fit in the normal Revo EVA3 hotend. Then I found the AliExpress version had an stl file, and it fit, however, the hotend was too low. This has two different modifications.
The 3mm down version makes a really good fit and worked well with my BL Touch, and should provide better cooling since more of the heat sink is being blown over by the fan.
The 5mm down version sets the nozzle to a proper height for the BTT Eddy I recently purchased. I could have also altered the height of the Eddy mount but I decided to edit the hotend part instead.
The first photo is my 3mm down version printing the 5mm down version. The second photo shows the original version side-by-side with the 3mm and 5mm to show the difference in the height adjustments.