PokeBox Pokeball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small Pokeball-inspired box that can be half-way opened and is fully modular!
- Ocena
- 5 / 5
- Polubienia
- 1257
- Pobrania
- 3071
- Wydruki
- 11
- Wyświetlenia
- 19 775
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
PokeBox v2.0 + new Ultra Ball!
Update: Robust and glue free hinge! New Ultra Ball version!
Hi everyone!
This model is my introduction to making mechanisms in 3D printing. Feel free to give feedback on ways to improve in both the building procedure or design :)
One of my main goals for this project is to make it as modular as possible to reduce plastic waste if any of the parts need to be replaced. The model is glue free, but the hinge pin is better to be super glued to the box base hook for the lid to not easily come off when opening and closing.
Additional information:
Clearances adapted to 0.2mm layer height and to the original size of the box
I would not recommend simply scaling up or down the model too much as the fittings will get either too tight or too loose
Assembly guide
The process is the same for all models (you can find all explosion views in the documentation section)
Notes
the provided .3mf's were created in Bambu Studio as this model is a reupload from the one I posted in MakerWorld, so let me know if you encounter any problems and I'll fix them :)
Hope you enjoy!