Theragun/Vac-U-Lock Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter replaces the massage head on compatible Theragun devices with a Vac-U-Lock attachment.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 2082
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
This model allows the quick and easy attachment of any Vac-U-Lock accessory to a Theragun hand-held massager. It incorporates a retaining clip designed to keep the adapter in place.
Based on the compatibility of the available accessories on their website, I believe this style of attachment is compatible with the PRO, Elite, Prime, Sense, Relief, Mini, G3PRO, and G3 models but perhaps NOT with the "Plus" models which seem to have a different attachment system. I can only verify for certain that it works with a 6th Gen Theragun Prime.
I suggest printing as shown in the attached image (pointy end down, supports on build plate only over 32 degrees). This allows sufficient bed adhesion with minimal support material and minimal post-processing. I used PETG (which doesn't react with silicone and is more tolerant of the higher temperatures on the exposed metal part of the massager shaft), 0.2mm layer height, 20% infill, and four perimeters for strength and rigidity.
DISCLAIMER: There are any number of ways to get into serious trouble by using this model. Yes, perhaps voided warranties or shredded toys but also very possibly grievous bodily harm. Don't do anything foolish; understand your limits; take it slow.