Kulp K4-PB (Pocket Beagle) Controller PSU Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple to print, print face down.
This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell).
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 3 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.
Vendor Links:
Kulp Controller - https://kulplights.com/product/k4-pb/
MW LRS 350 - https://www.amazon.com/LRS-350-24-Enclosed-Switching-Replacement-Termina
MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
3x - M3 - 12mm bolts/nuts (secure controller to mount)
Print Settings
Notes:
Print Settings
Nozzle: .4mm (.6mm or larger will work too)
Layer Height: .32mm
Perimeters: 3
Solid Layers: 4 top/bottom
Infill: 10%
Speed: Standard, but slower is better for the support brackets
Category: Electronics