1 / 5
STL File Description — Ornate Lion Statue (High Detail) — zdjęcie 1
1 / 5

STL File Description — Ornate Lion Statue (High Detail)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

High-detail 3D sculpture of a walking lion with ornate raised swirl patterns, a decorative wheel/chakra motif

Ocena
0 / 5
Polubienia
0
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Standard Digital File License

High-detail 3D sculpture of a walking lion with ornate raised swirl patterns, a decorative wheel/chakra motif on the flank and a flowing mane. The mesh is prepared as a single watertight, manifold object suitable for printing and post-processing into a metallic finish (gold/bronze with optional green patina).

Features

  • Fully enclosed / watertight geometry

  • Manifold: no non-manifold edges or loose triangles

  • Single connected component (one piece)

  • Fine raised ornamentation across body, mane and legs

  • Smooth tusk/face/leg topology for good surface finish

Example technical metadata (replace with your values)

  • Format: Binary STL

  • Units: mm

  • Bounding box (W × D × H): 220 × 80 × 140 mm (example — change to match your export)

  • Triangle count: ~110,000 triangles (high-detail)

  • File size: ~28 MB (binary)

  • Watertight: Yes

  • Manifold: Yes

Export / preparation notes

  • Export as Binary STL for smaller file size.

  • Apply transforms (scale to mm) and apply all modifiers before export.

  • Keep sufficient triangle density to preserve ornament relief; if file is too large, decimate carefully (target ≥ 50k triangles) while preserving curvature.

Print recommendations

Best printer type

  • Resin (SLA/DLP/LCD) — recommended for highest fidelity and crisp ornament details.

    • Layer height: 25–50 µm.

    • Use minimal support touchpoints (tree supports) to avoid scarring ornate surfaces.

  • FDM (FFF) — possible, but expect loss of very fine details.

    • Nozzle: 0.25–0.4 mm, layer height 0.10–0.15 mm.

    • Use a brim/raft and careful support placement.