Uprights for Bambu Labs AMS 2 for use with 3dFusionLabs AMS Hinge Flipper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uprights for Bambu Labs AMS 2 / H2D for use with 3dFusionLabs H2D AMS Pro2 Hinge Flipper Project.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Uprights for Bambu Labs AMS 2 / H2D for use with 3dFusionLabs H2D AMS Pro2 Hinge Flipper Project.
Designed to fit the above mentioned project with the newer AMS.
Recommended to print flat on the build plate in your choice of higher temp materials. Mine are printed with ABS, but that might not be high enough of a temp (we'll see once I start printing nylon again)
There is a left and a right - these are labeled based on standing in front of the printer like you are loading/unloading it. Slide them up into the AMS 2 and secure to the Hinge Flipper Project with their pins.
Remember to support 3dFusionLabs if you like their designs! ( I have no relationship with 3dFusionLabs. )