1 / 4
Replacement feet for airers - no more robot vacuum stuck on the laundry rack — zdjęcie 1
1 / 4

Replacement feet for airers - no more robot vacuum stuck on the laundry rack

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed it to fit on the most drying racks with 16mm tubes. Tested on Leifheit and vileda airers - perfect fit

Ocena
0 / 5
Polubienia
9
Pobrania
76
Wydruki
0
Wyświetlenia
410
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

If your robot vacuum keeps getting stuck on your airer, these raised replacement feet are a clean and aesthetic solution. Instead of adding barriers and other extra plastic parts, these feet replace the original ones. It adds extra height while keeping factory-look.

Easy print: PLA or PETG, no supports, no brim. 15% infill is more than enough.

Tagi