1 / 2
Ghost of Yotei Onryo Bounty Poster (no MMU) — zdjęcie 1
1 / 2

Ghost of Yotei Onryo Bounty Poster (no MMU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ghost of Yotei Onryo Bounty Poster using HueForge

Ocena
0 / 5
Polubienia
7
Pobrania
40
Wydruki
0
Wyświetlenia
289
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

No need for a MMU this can be done using manual filament changes.

I changed the wipe tower width to 30 to fit on the plate. 

Print settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 177.49x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

This print uses 3 unique filaments

PLA Prusament Jet Black Transmission Distance: 0.9

PLA Prusament Lipstick Red Transmission Distance: 2

PLA Prusament Pristine White Transmission Distance: 5.1

Start with Jet Black

At layer #14 (1.2mm) swap to Lipstick Red

At layer #18 (1.52mm) swap to Pristine White for the rest.

Tagi