Drill Dust Collector for Xiaomi & Dreame vacuums
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to collect dust while drilling, but couldn't find a ready-made attachment for my Xiaomi/Dreame vacuum cleaner.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Orientation: Print in the orientation shown in the image below for the best results and to maintain the snap-fit geometry.
Supports: This model can be printed support-free, but requires a 10-15 mm brim for bed adhesion.
Walls/Perimeters: Use 5-7 wall/perimeter lines for optimal strength.
Infill: Infill can be set to any density or even 0% (hollow print), as structural integrity is provided by the walls.
Material: PETG is the recommended material for its durability and flexibility.
Critical Setting: To ensure the snap-fit mechanism functions correctly and does not break, precise print temperature calibration is essential. Use a temperature tower to find the optimal setting for your PETG filament.
