1 / 8
Christmas tree lace star 2025-D180 (approx. 37 grams) — zdjęcie 1
1 / 8

Christmas tree lace star 2025-D180 (approx. 37 grams)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Weihnachtsbaum Spitze Stern 2025-D180 (ca. 37 Gram)

Ocena
0 / 5
Polubienia
7
Pobrania
38
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Weihnachtsbaum Spitze Stern 2025-D180

Trotz einer Größe von 180 mm ⌀ ist der Druck recht sparsam, benötigt je nach Material ca. 37 Gram, er ist hol und sehr dünnwandig.

Durch dies geringe Gewicht sehr gut geeignet, die Spitze eines Weihnachtsbaumes zu zieren, ohne sie durch übermäßiges Gewicht herunterzubiegen.

Kann mit entsprechendem Filament auch transluzent (Lichtdurchlässig) gedruckt werden.

Die 6-eckige Öffnung soll ein ungewolltes verdrehen auf dem Weihnachtsbaum verhindern. (z.B. durch Zugluft)

Ungefähres Gewicht je nach Material.:

PLA ca. 37 Gram

PETG ca. 37,6 Gram

ABS ca. 31 Gram

PC ca. 41,4 Gram

Euch frohe u. gesunde Festtage 🎅

! ACHTUNG !

Der G-Code ist mit EasyPrint erzeugt und nicht erprobt. In jedem Fall Vorsicht beim Entfernen von Stützstrukturen um den dünn-wandigen Stern nicht zu beschädigen.

----------------------------------------------------------------

Google translated:

Christmas tree lace star 2025-D180

Despite a size of 180 mm ⌀, the print is quite economical, requires approx. 37 grams depending on the material, it is thick and very thin-walled.

Due to its low weight, it is ideal for decorating the top of a Christmas tree without bending it down due to excessive weight.

Can also be printed translucent with the appropriate filament.

The hexagonal opening is intended to prevent unwanted twisting on the Christmas tree. (e.g. due to drafts)

Approximate weight depending on material:

PLA approx. 37 grams

PETG approx. 37.6 grams

ABS approx. 31 grams

PC approx. 41.4 grams

Happy and healthy holidays to you 🎅

! attention !

The G-Code was generated with EasyPrint and has not been tested. In any case, be careful when removing support structures so as not to damage the thin-walled star.

Tagi