1 / 1
Prusa Core One+ Spool Holder Oring Shims
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shims to set the Core One+/L spool holder tension
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
These are shims to help set the tension of the Oring for the Spool Holder on the Prusa Core One printers. Needed if your orings are too thin to give the spool holder the right amount of tension when locking into place. .5mm, 1mm, 1.5mm and 2mm shims included.
Install a shim first, then the oring.