Cubicle Hooks for Kimball XsiteTraxx workstation products
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cubicle Hooks for Kimball® XsiteTraxx® cubicles walls. Strong hooks click in place and does not fall out.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cubicle Hooks to be used with Kimball® XsiteTraxx® cubicles.
These Strong hooks click in place and does not fall out. (oh, and they don't cost $50!)
These fit very snug in top rail; you will have to use some force to press into the groove.
Recommended for less than 20lbs or 9kg.
Designed to use minimal material and for strength.
NOTE:
Print all hooks on side.
Print with 3 or 4 perimeters for the best strength.
Use high quality PLA.
PETG works great for most parts, but for larger hooks and heavier loads it may flex too much for your liking.
Recommend .2 Resolution, NO SUPPORTS. Skirts Not recommended.