Orange Pi Zero - Prusa Mount for Octopi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Apparently I'm the first person in the history of the internet to want to mount an Orange Pi Zero to my Prusa MK3…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Apparently I'm the first person in the history of the internet to want to mount an Orange Pi Zero to my Prusa MK3 frame. Huh.
Print at 0.2mm, no supports required.
Needs 2x M3x8mm bolts to screw into the Prusa frame, just above the electronics box - I didn't need bolts, as the screws are pretty snug in the metal frame.
Additional 4x M3x8 bolts required to keep case together.
Design was remixed using Microsoft 3D Builder from brawfx's excellent rPi4 Octoprint mount, and farrukh's Ocrange Pi Zero Case (which is also excellent), because I'm a newb.
Only downside is that the bottom of the case is now semi-flush against the Prusa frame, reducing ventilation - not sure if this will become an issue, but can't imagine it will be as Octoprint is pretty lightweight.
Category: 3D Printer Accessories