1 / 6
6th Gen iPad Holder for Delonghi Eletta Coffee Machine (ECAM45760W) — zdjęcie 1
1 / 6

6th Gen iPad Holder for Delonghi Eletta Coffee Machine (ECAM45760W)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Well, this might be the dumbest (but most useful) print I've ever designed. Long story short, I wanted a 6th Gen iPad…

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
861
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

Well, this might be the dumbest (but most useful) print I've ever designed.

Long story short, I wanted a 6th Gen iPad in my kitchen to display my Home Assistant Dashboard.

Decided I didn't want to put any holes in my wall, nor did I (or the wife) want the iPad sitting on the countertop.

My coffee machine - the Delonghi Eletta (ECAM45760W) - just so happens to have two (security) screws (you'll need a security bit set) holding the back of the case together

Lucky for us, the screws have space around them, allowing us to use these existing screws to fasten this iPad holder to the back of the coffee machine.

Everything fits very snug with no wobbling, I am pretty happy.

  1. Designed to reduce the amount of filament used, with most thinner walls at 2.4mm to reduce infill use.
  2. Print the "Arm" file twice, flat side down.
  3. Print both "holder" files standing up (ie, curved edges at the top)
  4. No supports required.
  5. Print at 40% infill for extra rigidity (probably could use less).
  6. Tested with PLA and PETG at 0.3mm and 0.2mm (1.75mm nozzle) on a Prusa MK3S+. Print time is 2h51m at 0.3mm.
  7. If you print at higher quality (lower layer height), the top of the curved sections will be nicer.
  8. No glue required between the holders and the arms.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

20-40%

Filament: Prusament PETG

Category: Kitchen & Dining

Tagi