Lego Steam Train Connecting Rods with holes at stud positions 1-2-5-9 and 1-4-8-15
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a remix of Lego steam train connecting rods for the Lego Emerald Night set and Mould King Orient Express set.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Here is a remix of Lego steam train connecting rods for:
Lego Emerald Night (set #21344). The holes for this connecting rod are at stud positions 1-2-5-9. For this train you will also need to print the "2x5" connecting rod from the original model (see link below). You'll need 4 of the 1-2-5-9 rod and 2 of the "2x5" rod, 6 rods total. HINT: Buy the Emerald Night train set in 3rd party bricks from AliExpress for $60 instead of the retired Lego set for $600. The Ali Express set will likely come with rusted wheel axles, so buy them separately from Bricklink.com, part number x1867, qty 8 for the set.
Mould King Orient Express (set #12025). This is a HUGE locomotive, and connecting rod holes are at stud positions 1-4-8-15. For this train you will also want to print the "2x7" connecting rod from the original model (see link below). You will need 2 of each rod, 4 rods total. The Oriental Express does not run reliably with the top connecting rod. The rod works its way loose during operation, so I removed it and did not plan for it in this remix. I think with some rework though, a better redesign could be made.
PRINTING NOTE: On my Bambu Lab A1, it helped me to set the X-Y hole compensation to 0.08mm. Then I didn't need to do any postprocessing afterwards to drill out the holes with a drill bit. I printed directly on a smooth plate with "supports on build plate only" enabled.