1 / 5
Laser Visualizer of Sound Wave mobile phone attachment. — zdjęcie 1
1 / 5

Laser Visualizer of Sound Wave mobile phone attachment.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An add-on to attach to the device a mobile phone.

Ocena
0 / 5
Polubienia
9
Pobrania
11
Wydruki
0
Wyświetlenia
121
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is not a remix but an add-on to the model, so a phone can be connected to channel music and tones directly to the device.

No need for Supports when printing other than touching the build plate.

A tip I will provide regarding the membrane covering is not to use balloons, but to use a sandwich. Place it over the circular opening. Then add rubber bands to secure it in place. Gently pull around the area until the plastic is fully tight. Use scissors or a razor blade to remove the area outside the rubber bands.