TwoTrees Sapphire Plus NF Sunrise mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mount for the NFSunrise hybrid direct driver extruder and cold end, for the TwoTrees Sapphire Plus.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 914
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is my mount for the NFSunrise/NFSunrize hybrid direct driver extruder and cold end, for the Sapphire Plus CoreXY printer.
This setup allows printing with flexible filaments, and doesn't compromise speed/acceleration with too much weight on the carriage. Rigidity isn't perfect because it only mounts from one side, but I haven't had any printing issues from that.
See my NF Sunrise fan and level-sensor mounts (remixed from qnub) for the other parts visible in photos.
I printed in PETG, but it would be more rigid in ASA or other high-tensile filament.
Additional hardware needed
3x M4x12mm Countersink screws
2x M3x8mm Countersink screws
3x M3x20mm Countersink screws
Small ball-nose allen keys to tighten screws inside the carriage – it's very fiddly!