Original Prusa i3 MK3S+ Model Remix

Thanks Prusa for this awesome model!
https://www.prusaprinters.org/prints/67178-original-prusa-i3-mk3s-gift-card
 

I wanted to be able to print the parts in different colors and make it much larger.
So I scaled it up a lot and cut the parts into separate pieces based on color.
I used this https://www.prusaprinters.org/prints/107930-prusa-logo for the Prusa logo.
I wanted it to be orange so it stands out.

There are 2 options for the print head:
"Black_Print_Head_With_Back.stl" is the easiest option.  It has a back piece to hold it in place like the original.
"Black_Print_Head_Without_Back.stl" is harder to assemble.  It doesn't need the back piece, but you have to slide the rods through it before glueing the rods to the X Axis.

All the parts are labeled according to the color they should be printed in.
You need the following colors / materials:
Black - PLA or PETG
Orange - PLA or PETG
Silver - PLA or PETG (I didn't have any silver so I used gray)
Black - Flex (For cables)

The following parts need glue:
Black_Controller_Knob.stl
Black_Controller_Lense.stl
Black_Motor.stl
Flex_Print_Head_Cable.stl
Flex_X_Cable.stl
Flex_Y_Cable.stl
Orange_Controller.stl
Orange_Logo.stl
Orange_Motor_Mounts.stl
Orange_X_Axis.stl
Orange_Z_Rod_Holders.stl
Silver_X_Rods.stl
Silver_Y_Rods.stl
Silver_Z_Rods.stl

The rest are snap-together like the original.

The X_Rods need a brim and the X_Axis needs supports.
 

Happy printing!