Middle bowls stands for my basic 8in diameter pet bowl stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A middle set of bowl stand parts for my Basic stand.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
I will add printed Photos once they come off the printer.
A simple bolt together expansion stand about 8in tall. There is also options for a 2in or 4in and center bowl stand spacer.
All parts are made to be either right or left depending on how you rotate when assembling. The center and this bowl stand are the only parts that don't rotate.
This was sliced in the Elegoo slicer.
For the rest of the print settings I kept them mostly the same as stock for a .4 nozzle at 0.20mm standard settings. The ones I did change are listed below.
Strength
Wall Loops: 6
Bottom Shell Layers: 5 (Same as top)
Sparse Infill Density: 5%
Sparce Infill Pattern: Adaptive Cubic
Support
enable support (check the box)
Type: Tree (auto)
The slicer photos shows the best way to orientate the parts for printing.
only extra hardware you need are 3mm x 10mm cap head screws.
Quantity of screws based on build
3x Bowls with 2/4in spacers: x(16)
4x Bowls with 2/4in spacers and 2/4in center: x(24)